 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BGD712C 750 MHz, 18 dB gain push-pull amplifier Rev. 01 -- 2 May 2006 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in SOT115J package operating at a supply voltage of 24 V (DC). CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features I I I I I I Excellent linearity Extremely low noise Excellent return loss properties Silicon nitride passivation Rugged construction Gold metallization ensures excellent reliability 1.3 Applications I CATV systems operating in the 40 MHz to 750 MHz frequency range. 1.4 Quick reference data Table 1: Symbol Gp Itot [1] Quick reference data Parameter power gain total current Conditions f = 45 MHz f = 750 MHz VB = 24 V [1] Min 18.2 19 380 Typ - Max 18.8 20 410 Unit dB dB mA The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 2. Pinning information Table 2: Pin 1 2 3 5 7 8 9 Pinning Description input common common +VB common common output 13579 1 5 9 Simplified outline Symbol 2378 sym095 3. Ordering information Table 3: Ordering information Package Name BGD712C Description rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads Version SOT115J Type number 4. Limiting values Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VB Vi Tstg Tmb Parameter supply voltage input voltage storage temperature mounting base temperature Conditions Min -40 -20 Max 30 70 +100 +100 Unit V dBmV C C BGD712C_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 2 May 2006 2 of 7 Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 5. Characteristics Table 5: Characteristics Bandwidth 40 MHz to 750 MHz; VB = 24 V; Tmb = 35 C; ZS = ZL = 75 . Symbol Gp SL FL Parameter power gain slope cable equivalent flatness of frequency response Conditions f = 45 MHz f = 750 MHz f = 45 MHz to 750 MHz f = 45 MHz to 100 MHz f = 100 MHz to 700 MHz f = 700 MHz to 750 MHz S11 S22 s21 CTB input return losses output return losses phase response composite triple beat f = 45 MHz to 790 MHz f = 45 MHz to 790 MHz f = 50 MHz 112 channels flat; Vo = 44 dBmV; measured at 745.25 MHz 60 channels flat; Vo = 44 dBmV measured at 745.25 MHz 79 channels flat; Vo = 44 dBmV measured at 547.25 MHz CSO composite second-order distortion 112 channels flat; Vo = 44 dBmV; measured at 746.5 MHz 60 channels flat; Vo = 44 dBmV measured at 746.5 MHz 79 channels flat; Vo = 44 dBmV measured at 548.5 MHz NF Itot [1] Min 18.2 19.0 0.5 17 17 135 - Typ - Max 18.8 20.0 1.5 0.35 0.5 0.15 225 -62 Unit dB dB dB dB dB dB dB dB deg dB - -67 - dB - - -68 dB - - -63 dB - -70 - dB - - -68 dB noise figure total current f = 50 MHz f = 750 MHz [1] 380 - 7 7 410 dB dB mA The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. BGD712C_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 2 May 2006 3 of 7 Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 6. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 A L F S W d U2 B yMB p Q e e1 q2 q1 yM B xM B b wM 2 3 5 7 8 9 c U1 q 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. 9.1 b c d D E max. max. max. e e1 F L min. p Q max. q q1 q2 S U1 U2 W w x y 0.1 Z max. 3.8 mm 20.8 4.15 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 3.85 0.38 2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 44.25 7.8 UNC OUTLINE VERSION SOT115J REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-02-06 04-02-04 Fig 1. Package outline SOT115J BGD712C_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 2 May 2006 4 of 7 Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 7. Revision history Table 6: Revision history Release date 20060502 Data sheet status Product data sheet Change notice Supersedes Document ID BGD712C_1 BGD712C_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 2 May 2006 5 of 7 Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 8. Legal information 8.1 Data sheet status Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.semiconductors.philips.com. 8.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Philips Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Philips Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. malfunction of a Philips Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Philips Semiconductors accepts no liability for inclusion and/or use of Philips Semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- Philips Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.semiconductors.philips.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Philips Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 8.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, Philips Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- Philips Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- Philips Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or 8.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 9. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com BGD712C_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 2 May 2006 6 of 7 Philips Semiconductors BGD712C 750 MHz, 18 dB gain push-pull amplifier 10. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 8.2 8.3 8.4 9 10 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 4 5 6 6 6 6 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. For more information, please visit: http://www.semiconductors.philips.com. For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com. Date of release: 2 May 2006 Document identifier: BGD712C_1 |
Price & Availability of BGD712C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |